Générateur de bruit série réf.: UFX7000 NOISECOM

 

The NOISECOM UFX7000A broadband noise generator has a
powerful single board computer with flexible architecture used
to create complex custom noise signals for advanced test systems.
This NOISECOM versatile platform allows the user to meet their most
challenging design requirements. Precision components provide
high output power with superior flatness, and the flexible
computer architecture allows control of multiple attenuators,
switches, and filter banks.


Documentation NOISECOM cliquez ici

JITTER NOISE GENERATOR réf.: J7000 NOISECOM

 

          The NOISECOM J7000A Series instruments generate white
Gaussian noise with a large crest factor to model “real world”
random jitter. This random jitter is commonly referred to as
Rj in the Stochastic Total Jitter model.

 

           Today’s high-speed digital circuit designers are challenged with small timing/jitter budgets to deliver high data rates that have a low Bit Error Rate
(ber). These NOISECOM instruments are used by serial-data-designers, and production test engineers for their jitter test requirements.


           The NOISECOM J7000A series allows the user to add Rj directly to a data
stream via an internal combiner, or by connecting to the delayline input of a Parallel, or Serial bert.

 

Documentation NOISECOM cliquez ici

GENERATEUR DE BRUIT SNR réf.: CNG EbNo SNR NOISECOM

 

          The NOISECOM CNG-EbNo is a fully automated instrument that sets and
maintains a highly accurate ratio between a user-supplied carrier and internally generated noise, over a wide range of signal power levels and frequencies.


          The NOISECOM CNG-EbNo gives system, design, and test engineers in
the cellular/PCS, satellite and military communication industries a cost-effective means of obtaining higher yield through automated testing, plus increased confidence from repeatable, accurate test results.

 

Documentation NOISECOM cliquez ici

GENERATEUR DE BRUIT ANALOGIQUE, réf.: PNG7000 NOISECOM

 

        The NOISECOM PNG7000A Series instruments generate white Gaussian
noise and provide a summing input to control signal-to-noise (snr) or carrier-to-noise (cnr) for bit-error-ratio (ber) testing.


         The output can also be used as a random source for time domain Jitter applications. A key feature of this NOISECOM instrument is its low distortion signal path that sums the user-supplied signal with the internal precision white noise source.


         The signal path has a nominal insertion gain of 0 dB, with very low amplitude and phase ripple. The NOISECOM noise source provides an exceptionally high crest factor for accurate bit error rate testing, even with large carrier-to-noise (cnr) or bit energy-tonoise density (Eb/No) ratios. With the addition of option 7, DC coupling will allow adding noise directly to a digital ttl, ecl or similar signal.


Documentation NOISECOM cliquez ici

Générateur de bruit variable VCC réf.: JV9000 NOISECOM

 

Aujourd'hui, les ordinateurs, les appareils de communication et autres équipements électroniques utilisent une combinaison de circuits intégrés numériques (LSI et VLSI), de CI analogiques, et de convertisseurs A/D et D/A.


En raison de contraintes d'espace, ces composants sont conditionnés dans un très petit espace, qui fournit à nouveau des conditions idéales pour l'interférence électromagnétique (EMI). Les concepteurs de circuits sont bien conscients des effets du bruit et de la gigue sur l'horloge et les données ; ces effets peuvent menacer l'intégrité des données et la fonctionnalité de leurs systèmes. Ils prennent un grand soin à supprimer les sources de telles perturbations. Une fois les causes des bruits indésirables repérés, leurs effets peuvent être minimisés, qui encore une fois, garantit un fonctionnement optimal du système avec des problèmes minimum de BER.

 

Un «nouveau» type de bruit commence à interférer sur la fonctionnalité des systèmes électroniques: les principaux coupables sont appelés « Bounce GND » et « Vcc Jitter Droop ». Alors que les spécifications Vcc des circuits intégrés définissent la plage de fonctionnement, le bruit à haute fréquence peut venir perturber leurs fonctionnalités. Et ce, même dans des limites de fonctionnement Vcc. Ces perturbations pénètrent dans les circuits grâce à des capacités résiduelles sur la puce.

Les concepteurs et les fabricants de circuits intégrés doivent s'assurer que leurs produits offrent une marge suffisante contre le bruit Vcc. La recommandation habituelle de placer un condensateur de blocage à côté de la broche VCC est donc loin d’être suffisante.



Documentation NOISECOM cliquez ici





GENERATEUR DE BRUIT ET D'INTERFERENCES, réf.: GPS 7500 NOISECOM

 

        The NOISECOM Noise Com GPS7500 Noise & Interference Generator is capable of generating up to 40 MHz bandwidth of arbitrary waveforms for the test of
susceptibility of GPS receivers to jamming, pulsed, CW, noise and any interference which we could imagine.
         A modular approach provides for expandability with additional independently programmable generators for L1, L2 or L5 bands. This unique combination allows for a single instrument to support today’s as well as possible future GPS standards.


Documentation NOISECOM cliquez ici

GENERATEUR DE BRUIT NUMERIQUE, réf.: DNG 7500 NOISECOM

 

         The NOISECOM DNG7500, generates programmable, user specified,
pseudo-noise and CW signal spectrums for RF, Microwave, and Fiber Optic equipment testing. It can provide a 70 MHz RF spectrum output including noise and CW waveforms to precisely emulate real-world noise and interference conditions.

 

          Noise and Signal parameters can be entered via keypad and a 8.4 inch color Graphical User Interface (gui). It can also generate signals from data files supplied by the user and downloaded via an optional Ethernet remote interface. The unit comes standard with a gpib, ieee-488, remote interface. The DNG7500 can provide digitally simulated Additive White Gaussian Noise (AWGN) with the following user settable parameters: precise start and stop frequencies with brick wall filters; tilt; notch (stop-band) filters with programmable frequency, bandwidth, and depth.

 

Documentation NOISECOM cliquez ici

Standard de bruit primaire Cryogénique, réf.: NBS serie NOISECOM

 

       The NOISECOM NBS-Series consists of calibration standards based on the primary fundamental physic constants of thermal noise and blackbody radiation and provides the ultimate accuracy in the measurement of extremely low noise figures
(noise temperatures).

 

       Simple to use, the NOISECOM NBS-Series is an ideal solution for noise
source calibrations, radiometer test and verification and low noise amplifier tests.

 

Documentation NOISECOM cliquez ici

Notre gamme de composants dans les domaines :

RF, Hyperfréquence, TETRA, millimètrique et submillimétrique.

 

  • Coupleurs,
  • ANTENNES,
  • Diviseurs,
  • Filtres,
  • Connecteurs,
  • Atténuateurs,
  • adaptateurs,
  • DC block,
  • Bias Tee
  • Charges
  • .....

Nos fournisseurs :

RF LAMBDA, MICROLAB, MICROWAVES DEVICES, PULSAR, AMD-GROUP, NHi, CORFIN, XMA, BRACKE ....

 

Interrogez-nous ...

Vous recherchez un matériel (nouveau ou ancien), appelez nous, nous le trouverons  pour vous ... un ancien FIT (Fast-Installation-Tester) 70 MHz ... 2000 MHz, un analyseur de spectre, une pièce détachée ....

 

Contactez-nous ...

Traductions de documents techniques

 

      Nos 25 années d'activité dans le test et la mesure nous permettent d'assurer ou de superviser vos traductions (Anglais, Français).

 

Des renseignements, des précisions, contactez-nous ici.

Une remarque, une demande à nous faire ..

 

Envoyez nous un petit courriel .....