Source de bruit manuelle NOISECOM, réf.: NC6000/8000

The NOISECOM NC6000A and NC8000A Series instruments are designed
for general-purpose noise applications on the bench, or in a rack
test station. The manual controls make it simple to operate and
reduce test set up time. The NOISECOM standard output power NC6000A
is typically used for BER, and SNR applications, while the NOISECOM high
power NC8000A is a good candidate for signal jamming. Each NOISECOM
instrument contains a precision noise source that delivers
repeatable, symmetrical white Gaussian noise and is integrated
with an amplifier, attenuator, and power supply. NOISECOM will
modify base units for specific customer needs. For pricing and
availability, consult the factory.

Documentation, cliquez ici.

Precision Calibrated Millimeter-Guide Noise Sources, Réf.: NC5000

The NC5000 Series noise sources feature outstanding stability,
switching speed, and ripple-free response over standard
waveguide bands. The high stability of the NC5000 Series allows
these units to be used in place of cumbersome gas tube noise
sources.
Ripple in the output of noise sources has a direct effect on
measurement accuracy, so Noisecom has tailored the response
of the NC5000 Series so that ripple is minimized throughout the
specified frequency range.
The NC5000 Series is available with noise output of 15.5 dB for
instrumentation (noise figure meter) applications, as well as in
narrow and full waveguide bands with 15 to 25 dB enr output.
The standard input bias connector is bnc female; others are
available.

Documentation, cliquez ici

Calibrated Coaxial Noise Sources, Réf.: NC3000

Noisecom’s NC3200 Series offers a high ENR output over a wide
frequency range. These calibrated noise sources have excellent
stability with temperature and voltage for tough environments.
The compact package is designed for severe environments
such as military EW RWR systems. Specials are available upon
request.
Like all Noisecom noise sources, the NC3200 Series features hermetically
sealed noise diodes and each noise source is supplied
with calibration data for the full frequency band.

Documentation, cliquez ici.

Amplified Noise Modules, Réf.: NC1000

The NC1000 series modules produce white Gaussian noise up to
+13 dBm. The high power modules are designed for secure communication
and signal jamming, while the low power modules
with high crest factor are used for signal impairment in BER, and
Jitter applications.
Each module contains a hermetically packaged noise diode that
has been pre-selected for special performance characteristics.
The standard module is designed for a 50 Ω load impedance.

Documentation, cliquez ici